Default PTP Config:
# PTP Config example #- protocol: ptp #domain: 0 #serve_unicast: true #max_unicast_subscribers: 0 #serve_multicast: true #server_only: true #announce_interval: 1 #sync_interval: 0 #delayrequest_interval: 0 #unicast_master_table: ['1.2.3.4','2.3.4.5', '3.4.5.6'] #delay_strategy: e2e # other options which can be used are: 'p2p' #hybrid_e2e: false # Send delay requests as unicast (enterprise profile) #priority1: 128 #priority2: 128 #monitor_only: false #use_layer2: false # Use ptp over ethernet instead of IP/UDP #interface: enp2s0 #profile: 'G.8275.2' # other options which can be used are: 'G.8275.1', 'G.8265.1' and 'enterprise-draft' #logsource: 'Grandmaster Clock in NY4' # configurable name for source included in all logging records for source #asymmetry_compensation: 0 # In nanoseconds. Static compensation for know asymmetry (+/- as the case maybe) #max_packets_per_second: 0 # If inbound packet rate exceeds this a WRED algorithm is used
To configure a PTP domain modify the below line to the domain of choice.
domain: 0
So the config will look like this:
# PTP Config example
- protocol: ptp
domain: 0